A professional audio production enterprise integrating R&D, production, sales and service
Product Introduction The Q1 speaker adopts a passive dual frequency design, equipped with 2 10 "low-frequency units and 1 1.3" high-frequency compression driver unit, as well as a drum waveguide. The 75 ° horizontal constant pointing characteristic can control the lower limit to 400Hz, while the 15 ° vertical high-frequency diffusion angle enables Q1 to be used for vertical arrays and generate curved coherent wavefront in front of the array. The mechanical structure of the speaker, combined with acoustic design, allows the vertical coupling angle between each speaker to be adjusted between 0 ° and 14 °. Therefore, according to the different situations and requirements of users and venues, the Q1 array can be combined from 2 speakers (with a diffusion angle of 15 ° to 30 °) to 20 speakers. Q1 box structure is made of solid marine plywood. The surface of the box is coated with a layer of anti-collision paint. The front panel of the speaker is protected by a solid metal grille, and covered with a layer of replaceable acoustic foam material. The side panel is fused with a pair of handles, and the rear panel is embedded with two EP5 or NL4 parallel interfaces. Mainly used for mobile and fixed installation, sports venues, hall sound reinforcement, performance squares, etc. |
Product Parameters | |
System Type | Two frequency dual 10 inch linear speaker |
Frequency | 60/100 Hz - 17 kHz(-5dB) |
Soeaker Unit | LF 10"×2+HF 3"×1 |
Power | LF 600W,HF 100W |
Sensitivity | 103dB |
Max SPL | 139dB(Peak) |
Impedamce | 16Ω |
Dispersion | 75°×15° (H×V) |
Dimension(W×H×D) | 580×308×410mm |
Weight | 19.5kg |
Dimension